Vfd/Ir Module Installation Procedure; Standby Atx Power Cable; Vfd Standby Power Cable; Ir Module Usb Connector - Origen ae X11 User Manual

1
2
3
4
1 -

Standby ATX power cable.

current from the PSU when the PC is off. This allows the IR module
to function when the power is off, and turn the PC on remotely.
2 -

VFD standby power cable.

3 -

IR module USB connector.

connects the IR module to a free internal USB header. It allows the
IR Trans software to communicate with the IR module.
4 - Switch cable motherboard connector.
motherboard power on header to the IR module for manual
and remote power on functions.
VFD/IR module installation
VFD/IR module
installation procedure.
This should be done
once the motherboard
has been fitted, and
before the drive
caddies are installed.
This cable is required to draw a standby
This is the internal USB header cable that
This cable connects the
11