Installing Vfd/Ir Software - Origen ae M10 User Manual

Installing VFD/IR Software

Read this notice before installation,
The select switch must be a S-Graph in
●
VF310 back sides S-Graph and Philips.
The USB(M-IUSB-C1) cable must be
●
connected to USB header pins.
The 5V standby cable must be connected
●
The display of VF310 cannot be shown
●
before installation.
1. Download the VF310 installation software from
our web-site or as attached following link.
http://www.origenae.co.kr/data/iMON_7_45_0109_OrigenAE.zip
2. Release the downloaded file in the location
which is suitable.
3. Installation the iMONsetup in folder.
4. After opening a read the concern, Click
'Start Setup' to continue.
5. Select the language.
8
6. Click 'Next'.
7. Select the programs. (iMON is essential and
iMEDIAN HD is unessential)
8. Click finish to next setup now.
9. Reboot computer to activate VF310.
10. Please select the MCE remote from the
option page.
Installation is now completed.
Thank you.