Setting Humidity Controls - Lennox icomfort Touch Thermostat Homeowner's Manual

Setting humidity controls

NOTICE
Humidifier and dehumidifier controls must be setup by the in-
staller or these controls will not be visible. If your system has one
or both of these features and the controls are not visible, contact
your Lennox dealer for proper setup.
To adjust humidity controls (either to humidify or dehumidify) select the
indoor humidity tab (figure 18). Some systems may have a humidifier and
some may have a dehumidifier, while still other systems may have both.
You can control either or both from this screen.
Use select to tell the system which humidity control you want to address.
Remember that the humidify" control only operates while heating and
dehumidify" only operates while cooling. Also, use select to turn the hu-
midification/dehumidification OFF.
Use switch to change which operation you want to change. As shown in
figure 18, the humidifier will be controlled. As shown in figure 19, the de-
humidifier will be controlled.
humidity
current indoor
humidity level is 45%
(OK)
50
45
heating
40
comfort
range
40
Figure 18. Humidifier controls
icomfort Toucht 7−Day Programmable Communicating Thermostat
Page 11
indoor
system settings
humidify / de−humidify
de−humidify
humidify
off
set to
humidifier settings
are shown
press switch button
at right to show
dehumidifier settings
HELP
select
switch