Basic Operation; Connections - Pioneer DDJ-SZ Operating Instructions Manual

Basic Operation

Connections

1 Connect headphones to one of the [PHONES] terminals.
2 Connect powered speakers, a power amplifier,
components, etc., to the [MASTER OUT 1] or [MASTER OUT 2]
terminals.
! To output the sound from the [BOOTH OUT] terminals, connect speakers or
other devices to the [BOOTH OUT] terminals.
! For details on the connections of the input/output terminals, see Connections
(p. 6 ).
3 Connect this unit to your computer via a USB cable.
USB cable
(included)
This product satisfies electromagnetic noise
regulations when it is connected to other equipment
through shielded cables and connectors.
Use only the furnished accessory connecting cables.
4 Turn on the computer's power.
5 Connect the power cord.
Powered speaker, etc
D44-8-2_A1_En
To power outlet
Power cord
(included)
6 Press the [u] switch on this unit's rear panel to turn this
unit's power on.
Turn on the power of this unit.
! For Windows users
The message [Installing device driver software] may appear when this unit is
first connected to the computer or when it is connected to a different USB port
on the computer. Wait a while until the message [Your devices are ready for
use] appears.
7 Turn on the power of the devices connected to the output
terminals (powered speakers, power amplifier, components,
etc.).
! When a microphone, DJ player or other external device is connected to input
terminals, the power of that device also turns on.
13
En