Opening and closing the bonnet
Fig. 184 Open the bonnet
Read and observe
and
Open flap
›
Open the front door.
›
Pull the release lever underneath the dash panel in the direction of the ar-
row
» Fig.
184.
1
Before opening the bonnet, ensure that the arms of the windscreen wipers
are correctly in place against the windscreen, otherwise the paintwork on the
flap could be damaged.
›
Push the release lever in the direction of arrow
The bonnet is then unlocked.
›
Grasp the bonnet catch and lift in the direction of arrow
›
Remove the lid prop in the direction of arrow
›
Secure the open flap inserting the end of the post into the opening in the di-
rection of arrow
.
5
Close the flap
›
Lift the bonnet.
›
Decouple the bonnet support and press into the holder designed to hold it.
›
Let the bonnet drop into the lock carrier lock from a height of around 20 cm –
do not push it in!
194
General Maintenance
on page 193 first.
.
2
.
3
from the holder.
4
WARNING
Check whether the bonnet has been closed properly. Also make sure that
■
a vehicle with an opened bonnet does not appear in the instrument cluster
display
» page
47.
If you notice that the lock is not properly engaged while driving, stop the
■
vehicle immediately and close the bonnet – risk of accident!
Make sure that when closing the boot lid, no body parts are crushed -
■
there is danger of injury!
CAUTION
Never open the bonnet by the locking lever
Engine compartment overview
Fig. 185 Principle sketch: Engine compartment
Read and observe
and
Arrangement in the engine compartment
Coolant expansion reservoir
A
Engine oil dipstick
B
Engine oil filler opening
C
Brake fluid reservoir
D
Battery (below a cover)
E
Windscreen washer fluid reservoir
F
» Fig.
184.
on page 193 first.
» Fig. 185
198
196
197
199
200
195