General Information; Operating The Tv With A Universal Or Sky (Bskyb) Remote Control - UMC X26G-GB-TCDU-UK User Manual

OPERATING THE TV WITH A UNIVERSAL
OR SKY (BSKYB) REMOTE CONTROL
Using a Universal Remote Control.
You may wish to use a Universal Remote control to operate your Television. In order to do so, you
will need to enter the 'code' below into your universal remote control, to do this, please follow the
instructions included with the Universal remote control. Please note that if your remote control does not
accept the code, this is because the software/fi rmware installed on the remote control is too old. Please
contact the manufacturer of the Universal Remote control for assistance.
Universal Remote Code - 2106 (TV functions)
Using a Sky / Sky+ / Sky HD Remote Control
If you wish to use your Sky remote control to operate your Television, you need to programme a 4 digit
code into your Sky, Sky+ or Sky HD remote control.
Please note that the code below will only be accepted if the Sky remote control is a Revision 9 (launched
Autumn 2010) or later.
To fi nd out which version of Sky remote you have, remove the battery cover, you should see a sticker
showing the 'Rev' number.
If your Sky remote is Rev 8 or earlier, you will need to purchase a new Sky Remote control in order to
operate the TV's functions. At the point of manufacture of this TV, the latest Revision 9 remote controls
are only available to purchase directly from Sky, alternatively, you can purchase our versions from the
helpline / website.
Sky
If your Sky remote control is a Revision 9 or later, please follow the instructions below.
1) Press TV
2) Press and hold the 'Red' button and 'Select' at the same time until the red LED light at the top of the
remote fl ashes twice.
3) Enter the code. If the code is accepted the red LED light will blink twice. If the LED only blinks once...
you have either entered the code incorrectly or the Sky remote isn't a revision 9.
4) Press select to store the code.
5) Press the Standby button on your Sky remote control and the TV should go into standby mode.
Sky / Sky+ / Sky HD Remote code - 2134 (Revision 9 or later only)
28
The very latest versions of remote controls to operate your Sky
/ Sky+ / Sky HD in addition to operating the functions of the
Television can be purchased from the helpline or website.
Our versions (from One for All) are slightly smaller than the
regular Sky remotes and operate your Sky box the same way
your current Sky remote does, in addition, our versions operate
the functions of your television as they include the very latest
software/fi rmware.
Please note that as we have to install the necessary software /
fi rmware onto the remote control prior to shipping, you must
provide us with your TV model number in order that we can
do this.
Sky+/Sky HD
Helpline No UK. 0871 2000 463 ROI. 01443 3940
Web Support: www.skymediauk.co.uk

General Information

2302 (DVD Functions - where included on the TV)