KitchenAid KUDU03FT Reference Manual page 9

Toreplace therack
1. Gently p ull r ack tracks f orward i ndishwasher until t hey stop
and clickintoplace.
2. Toopen track stops, flipthetrack stop totheoutside o fthe
track.
4. Insert frontrack rollers o neach side oftherack intotherack
slots.
5. Close t rack stops onboth sides ofrack.
3. Place t heback rack rollers o neach side oftherack intothe
track slotand rolltherack back intothetracks.
\
6. Slide rack back into dishwasher.
The lower level rack is designed for plates, pans, casseroles, and • Load soup, cereal, and serving bowls in the rack in a variety of
utensils. Many items, up to 13" (33 cm) tall, fit in the lower level ways depending upon their size and shape. Load bowls
rack. (See recommended loading patterns shown.) securely between the rows of tines. Do not nest bowls
NOTE: The features on your dishwasher rack may vary from those because the spray will not reach all surfaces.
in the drawings shown.
10 place setting
12 place setting
• Do not load glasses, cups, or plastic items in the lower level
rack. Load small items in the lower level rack only if they are
secured in place.
• Load plates, soup bowls, etc., between tines.
• Overlap the edges of plates for large loads.
Utensil load
• Load cookie sheets, cake pans, and other large items at the
sides and back. Loading such items in front can keep the
water spray from reaching the detergent dispenser.
f
Mixed load
• Secure heavily soiled cookware face down in the rack.
• Make sure pot handles and other items do not stop rotation of
the spray arm(s). The spray arm(s) must move freely.
• Do not load items between the lower level rack and the side of
the dishwasher tub because they might block the water inlet
opening.