Optional Accessories; Section 5 - Lightspeed FP 1000 User Manual

SECTION 3:

OPTIONAL ACCESSORIES

REDMIKE CONTROLS AND CONNECTIONS
1
2
3
1. POWER BUTTON: Press this
button to turn the REDMIKE on,
press again to turn it off (mute).
2. POWER/LOW BATTERY
INDICATOR: A blue light indicates
the REDMIKE is on and fully
charged. A red light indicates a
charge is needed.
3. BATTERY COMPARTMENT: To
access the battery compartment,
slide the door downward. The
battery should only be replaced
by a Lightspeed AA rechargeable
sensing battery (part # NH2A27).
4. YELLOW PROTECTIVE TAB: Slide
the battery compartment door
open to remove this disposable
protective tab before use. NOTE:
do not attempt to remove the
tab without first opening the
compartment door, as it may tear,
leaving fragments.
4
5
5. AUDIO/MICROPHONE INPUT:
Use this input to plug in a laptop,
MP3 player or other audio
source to wirelessly transmit
audio to be played through the
system. Alternatively, an external
microphone can be connected.
6. CHANNEL SELECT SWITCH
(CH A/B): This switch allows for
selection between Channel A
or B. If you are using a single
microphone, we recommend using
Channel A.
7. VOLUME CONTROLS (UP -
DOWN)
8. CHARGER CONTACTS (+ -):
These contacts interface with the
charging tabs when the REDMIKE
VC is placed in the RMCC cradle
charger.
6
7
8
21