Front And Top Panel Controls - Lightspeed FP 1000 User Manual

FRONT AND TOP PANEL CONTROLS

1
3
1. CH. A VOLUME: sets the nominal
volume level of the teacher
microphone (transmitter switched
to CH A). Rotating the adjustment
knob clockwise increases the
output level.
2. CH. B VOLUME:
volume level of the optional
second microphone (transmitter
switched to CH B). Rotating
the adjustment knob clockwise
increases the output level.
3. IR INDICATORS (IR):
will glow red when the
corresponding transmitter is
turned on and being received.
This light confirms the FP 100 is
receiving a steady infrared signal.
4. AF INDICATORS (IR):
flash green when audio (voice)
from the microphone is detected.
3
4
sets the nominal
These lights
These lights
2 2
5 6 7
5. DC POWER INPUT:
power supply into this jack.
6. CH. A AUDIO OUTPUT:
balanced audio output can be
connected to the mic or line input
on a mixer/amplifier to amplify
the audio signal from the CH. A
transmitter.
7. CH. B / MIXED AUDIO OUTPUT:
This balanced audio output sends
the audio from the microphone set
to CH. B. Both CH. A and CH. B
transmitters (depending on the
position of the B/MIX switch) are
ouput to a mic or line input
on a mixer/amplifier.
8. B/MIX SWITCH:
determines the audio source that
is output through the CH.B/MIXED
Audio Output jack. When the
switch is set to 'MIX' (default), both
the CH. A and CH. B signal are
output through this jack.
8
Plug the 24V
This
This switch
7