Table of Contents
Advertisement
CAT RECEIVER
DC 5V:
Connect from 5V DC power supply into the unit and connect the adaptor to an AC outlet.
q
IR RX:
Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.
w
IR TX:
Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the
e
equipment to be controlled.
CAT5e/6:
Connect the CAT input of the receiver with the CAT output of the transmitter with CAT5e/6 cable.
r
HDMI OUT:
This slot is to connect the HDMI input port of your display such as an HDTV.
t
LOCK LED:
This LED will illuminate when the HDMI signal from the transmitter is stable.
y
POWER LED:
This LED will illuminate when the device is connected with power supply.
u
COAXIAL OUT:
This slot is where you connect to the audio amplifier with coaxial cable.
i
ARC :
Switch the ARC switcher will open or close the ARC fuction.
o
ARC Fuciton:
If you need use ARC, your HDTV must support this function. When you open the ARC fuciton, the coaxial of the
receiver will output the HDTV current display content audio signal. Otherwise will output the HDMI source (DVD, set-top-box,
etc.) audio signal.
CONNECT AND OPERATE
1. Connect the signal sources such as Blu-Ray Player, Play Station 3, audio/video receiver, satellite receivers and computers equipped with
HDMI output interfaces with a short high-speed HDMI cable to the HDMI Switcher inputs.
2. Connect the HDMI output of the HDMI Switcher to a high-definition display device such as HD-LCD, HD-DLP and HD projectors with HDMI
input interfaces. Use high-speed HDMI cables that are recommended for the distances that are required for each connection.
3. The Switcher is powered by an external power supply which is included. Connect power first to the source, then to the Switcher and then
to HDTV or projector.
4. The input source can be controlled from the display. This is accomplished by using an optional IR Receiver pigtail pointing away from the
display(s), which can be connected with an optional HDMI IR Adapter, and inserted between HDMI cable connector and display with the
toggle switcher at the "IR" position. The IR Transmitter pigtail is used to connected to the switcher and pointed to the source(s). The switcher
also have a capability of being controlled via Remote control.
OPERATION AND FUNCTIONS
5
Advertisement
Table of Contents
