Hamilton Beach change-a-bowl Instructions Manual page 6

840140800 Ev01.qxd
7. Cut food to fit food chute. Pack
food chute tightly with food. Insert
food pusher in chute. Always use
the food pusher to feed food into
the chute. NEVER PUSH FOOD
THROUGH CHUTE WITH fingers.
8. Plug in unit and process food by
turning ON.
9. When food chute is empty, select
OFF. Wait until blade has stopped
rotating before removing cover.
10. To process into another GladWare
bowl, turn motor counterclockwise
to unlock cover from permanent
bowl. Remove GladWare
insert an empty GladWare
Cleaning
1. Wash the GladWare
nent bowl, cover, disc, food pusher,
disc storage lid (optional accessory),
and disc lock in hot, soapy water.
The following parts may also be
washed in the top rack of the dish-
washer: GladWare
bowl, cover, disc, food pusher, disc
storage lid (optional accessory), and
disc lock.
2. Wipe the motor, switch, and cord
with a damp cloth or sponge. To
remove stubborn soil, use a mild
non-abrasive cleanser. NEVER
IMMERSE THE MOTOR IN WATER
OR OTHER LIQUID.
6
8/1/05 1:58 PM Page 6
®
bowl and
®
® bowl.
® bowl, perma-
® bowl, permanent
To unlock:
11. Place a hand on a tab
on each side of Permanent Bowl.
With a finger on the top of the tab
and a thumb on the bottom tab of
each side, turn counterclockwise.
3. To store, assemble the unit. Place
cover on bowl but do not lock.
OPTIONAL:
Place extra disc in disc storage area
under permanent bowl. Snap on disc
storage lid.
Optional Accessories