Check the cable before use if the cable is found to damaged or
scuffed (fig 55) replace with a genuine Numatic part.
The Cable has been designed to be changed easily.
Unscrew the cable / fuse cover plate (fig 56)
Ensure you dispose of the cable in a proper
manner.
Fig 55
Lift the cable off the pins (fig 57) and remove from the plastic
clips (fig 58).
Fig 57
Remove the rubber grommet, free the cable from the machine
(fig 59)
Unscrew the cable strain relief and replace the cable.
Fig 59
Fit the new cable to the strain relief (fig 60) and refiit to the
machine (fig 61).
Refit Grommet and clip cable in place to the bottom of the
machine (fig 62).
Refit cover and secure with the 3 retaining screws (fig 63).
Fig 60
Fig 62
Changing the cable
233935 Page 19 06/11 (A04)
Fig 56
Fig 58
Fig 61
Fig 63