Table of Contents
Advertisement
If the spray nozzles are blocked, they have been designed to be easily cleaned. Undo the spray nozzle cap (Fig 45)
remove (Fig 46) check the 'O' ring for damage replace if necessary (Fig 47) and clean the nozzles (Fig 48).
Note.
Inspect the O ring seal and replace if necessary (Fig 47).
Fig 43
Fig 44
Fig 45
Fig 47
Located in the bottom of the NuChem / water
tank is a barrel filter (Fig 43).
Clean if necessary.
Ensure the machine is cleaned and all hoses and tubes are
flushed with cold clean water (fig 44).
After use, ensure the solution tube has been flushed
with clean water for at least 60 seconds.
Blocked nozzles
233935 Page 17 06/11 (A04)
Fig 46
Fig 48
Advertisement
Table of Contents
