Table of Contents
Advertisement
All the switches on the NHL machine have been designed to enable easy use and they are placed on the front of the
machine. These switches are to be operated by hand and NOT to be operated by foot.
A
Note.
If machine not functioning correctly, see the Trouble-shooting guide Page 19
Fig 31
Note.
Do not over wet remember 'What goes in, must come out again!.
Operating the machine
Controls and Switches
B
C
Correct way to use the machine
Fig 30
Fig 32
233935 Page 14 06/11 (A04)
On heavy soiled carpets you can double the pressure of
the pump to 60 PSI by using the Hi / Lo switch (A)
To active the vacuum press 'vacuum switch' (B)
To activate the pump press 'pump switch' (C)
The NHL 15 floor-tool is provided with rear wheels
allowing the floor-tool to glide over the surface to be
cleaned (Fig 30).
Thus making the cleaning process less tiring and easier to
use.
Apply a slight downward pressure on the wand lifting the
floor-tool blade from the cleaning surface.
Move the floor-tool forward on the rear wheels (Fig 31).
Lift the wand allowing the floor-tool blade to come in
contact with the cleaning surface (Fig 32).
Operate the trigger (Fig 33), allowing the cleaning solution
to penetrate the carpet and slowly draw the floor-tool
rearward Vacuuming the cleaning solution up at the same
time (Fig 35).
Work backwards towards the exit door. (fig 34)
For cleaning tips see page 2
Fig 33
Fig 34
Advertisement
Table of Contents
