Table of Contents
Advertisement
HD MotionCam Installation Manual
Tools Needed
(Not supplied by WeatherBug)
• Wire cutters and pliers
• #2 Phillips screwdriver
• 10 mm wrench
• Heavy-duty drill with bits sized up to 1-1/4" – bits must be appropriate for
material being drilled into (masonry, wood, metal, etc.) and must be long enough
to penetrate the support walling from exterior to interior (possibly as much as 10"
or more).
• Socket drivers, designed to be used with a drill, of the size(s) needed to fit the
screws intended for use in mounting the HD MotionCam.
• Fish Tape to pull cable through wall
• Electrical Tape to tape the ends of cables for protection and to hold connectors
and cables together.
• Bolts/Screws needed to attach the mounting arm to the wall will vary according to
several factors. Both the composition of the mounting surface and the weight of
the unit (approximately 16 pounds) must be taken into account.
• An adjustable ladder
Release 1, Version 1.0
-9-
February 2011
Hide quick links:
Advertisement
Table of Contents
