Table of Contents
Advertisement
HD MotionCam Installation Manual
Installation
Indoor Preliminary Setup
SETTING THE HD MOTIONCAM UP INDOORS ON THE NETWORK IS
ESSENTIAL FOR THE SUCCESSFUL OUTDOOR INSTALLATION OF YOUR
CAMERA.
Network Requirements: Port 21 TCP outbound for FTP images must be open
for the internal IP address of the camera.
Port 80 TCP inbound must be open in order to operate the camera and view
streaming data from any computer.
Internet Explorer must be installed on the computer used for retrieving the IP
address of the camera and it also must be installed on the computer used for
viewing live images from the camera.
By following these preliminary steps you will have the ability to obtain the internal
IP address of the HD MotionCam, which you need in order to view the live video
transmitted from the HD MotionCam. It is imperative that you install the camera
indoors initially in order to guarantee that the camera is working as it should.
In order to test the camera indoors the following supplied equipment will be needed:
• HD MotionCam
• 200 ft Ethernet Cable
• 100 ft Power Cable
• Power Supply
• Network Surge Suppressor
Access to a computer running on the same subnet as the network connection that will be
used to connect the camera to for this test is needed. An electrical outlet needs to be
nearby as well.
Release 1, Version 1.0
-11-
February 2011
Hide quick links:
Advertisement
Table of Contents
