KitchenAid KUDD03DT Installation Instructions Manual page 9

6. Rotate the drawer to the right onto its side and place on the
protective cover.
7. Slide the left-hand runner back into the dishwasher.
8. Reach inside the dishwasher to adjust the feet using a 5 mm
open end, box end, or socket (if space permits) wrench.
Adjust for cabinet height and level. Place a level on the drawer
runners. Level the dishwasher to within 3/32" (2.4 mm) from
front to back.
3/32" (2.4 mm) minimum
clearance to underside of counter
9. Place a level across the drawer runners. Level the dishwasher
to within 3/32" (2.4 mm) from side to side.
level
Choose attachment option
Option 1: Side attachment
1. The dishwasher side attaching tabs are accessed through
holes in the sound insulation.
IMPORTANT: For best installation, use all four attaching tabs.
2. Secure the attaching tabs to the cabinet using #8 Phillips
head screws.
3. Pull the bottom drawer runners all the way out. Make sure the
latches on the back of each drawer runner are facing forward.
drawer
runner
latch
bracket
4. If the bottom drawer was rotated, rotate the drawer to unwind
the hoses and then put the drawer on the runners, making
sure the hoses are looping upward.
5. Make sure both runner clips have snapped into place. If they
have not, pull the runner clips forward until they do.
6. Close the bottom drawer.
side
mounting
bracket
latch
9