Button Instruction; Folding The Unit - Genee World Genee Vision 8100 User Manual

POWER (Control the visualiser On/Off)
disconnect the projector from the RS232 port first) and select the Baud Rate and
Mir (V-reverse the image)
Parity based on the projector's Baud Rate, then click the "TEST" button to pop up the
Frz (Freeze the image)
Projector Code Test dialogue box, input the Baud Rate and Parity based on the
Neg (Display film negatives)
projector's Baud rate, then click "Open".
Title (Freeze the top 1/8 of the screen)
D./S. (Switch between static mode and dynamic mode)
Far/Near (Focus far or near)
Split (Image Split function)
Ppw (Control the projector On/Standby)
Pin (Projector input signal selection)
/ (Move the image up/down)
CCD/PC1/PC2 (CCD/RGB input signal selection)
S-VIDEO /VIDEO (Video input signal selection)
LAMP (Control the arm lights and back light)
AUTO (To auto adjust white balance and auto focus)
T/W (Increase and decrease the magnification)
Remarks: Frz, Title, D./S. and Split functions are only available on PROJECTOR OUT port.
Click the projector control buttons on the visualiser's operating panel to check if
the control code that the program received is the same as the sending code. If

BUTTON INSTRUCTION

the receiving code is same to the sending code, the input codes are correct. If the
Button function instruction sheet
visualiser can not control the projector, please do the following.
1. Check to see if the source control codes of projector are correct.
2. Check to make sure the connection between the visualiser and the projector is
Button Instruction
correct.

FOLDING THE UNIT

Freeze Image
1. Fold the right arm light down first onto the base, then the left arm down.
Mirror Im age
Mir
Dynamic/S tatic Mode
D./S.
S plit Screen
Split
Projector Power
On/Standby
Focus Adjustment
Negative/Positive
Freez e the Top 1/8 of the Screen
Neg
Fr z Title
Move Image Up
Far Near
Move Image Down
Ppw Pin
Projector Input Selec t
Press and H old Two S econds
to P ower Off Vis ualize r
Indicator Instruction
CCD /PC1/ PC2 S-V ideo/V ide o
POWER
Aut o Ad just Color
Brightn ess and Focus
Light Control
(Side Light s/ B ack Light /Light s Of f)
Fold/Setup Instruction