Dynamic/Static Mode Switch - Genee World Genee Vision 8100 User Manual

IMAGE REVERSION
6. When you open the capture program, but can not capture the image, please
Press the "Mir" button once to V-reverse the image and the vertically mirrored
set the signal input source: click "Option"
image will be displayed. Press the "Mir" button again to exit. (On the remote
INPUT as S-Video IN.
WORKING ON THE STAGE control, please press the "MIRROR" button)
IMAGE SPLIT
1. Place your material on the working surface.
Press "SPLIT", the image will be split into two images. One is the current live
2. Select the enlargement required with the " T" and " W " keys.
image the other is a frozen snapshot of the last image, Press the "SPLIT"
3. Adjust the focus with the "Near" and "Far"
WORKING OUTSIDE THE STAGE button again to exit.
For showing 3-dimensional objects with the visualiser, just place them on the working
surface and adjust the " T" or " W" and "AUTO" keys. If the object is too big for the
stage or you want to show it from the side, just place it behind or in front of the unit
and tilt the camera by hand (please take off the close-up lens first).
ROTATE CAMERA HEAD
The camera head can not rotate vertically and horizontally, the camera inside can be
rotated horizontally by hand.
Note: This function is not available on S-Video and Video output.

DYNAMIC/STATIC MODE SWITCH

To display dynamic images, Press the "D./S." button to switch to
the Dynamic mode, the image will be clear and has no choppy strobe effect.
To display still images, press the "D. / S." button switch to the Static mode.
Note: This function is not available on S-Video and Video output.
LIGHT
The arm lights are on when the power is on. Each time you press the "LAMP"
buttons, the lighting changes as below.
+
"Video Crossbar", and then set
keys or "AUTO" key.