Genee World Genee Vision 8100 User Manual page 25

REMOTE CONTROL
2. Rotate the camera head clockwise until the camera head is parallel to the
camera stand, carefully Fold the camera stand down to the front panel.
POWER (Control the visualiser On/Off)
SAVE (Save captured images)
RECALL (Display saved images)
EXIT (Exit RECALL mode)
LAMP (Control the arm lights and back light)
FREEZE (Freeze the image)
NEG (Display film negatives)
MIRROR (V-Reverse the image)
SPLIT (Image split function)
D./S. (Switch between static mode and dynamic mode)
Cautions:
XGA (Switch between XGA (1024 x 768) and SVGA (800 x 600) mode)
a. Don't lay the unit down flat.
B&W (Switch between colour mode and B&W mode)
b. Don't try to stand it on its rear or sides.
TITLE (Freeze the top 1/8 of the screen)
c. Don't try to pick up this unit by pulling the camera stand.
PROJECTOR POWER (Control the projector On/Standby)
PROJECTOR INPUT (Projector input signal selection)
TEXT (Switch between image/text mode)
AUTO (To auto white balance and auto focus)