Genee World Genee Vision 8100 User Manual page 19

USB PORT
OUTPUT MODE AND VERTICAL FREQUENCY (60Hz)
The RGB output can output a signal in the SVGA /XGA format.
The USB port can be used to transfer still images from the visualiser to a
In order to achieve the best picture quality you must set the outputs of the
computer. No additional computer hardware is required. In this way, the
visualiser to match the native resolution of your display unit.
visualiser can be used as a 3-D scanner for your computer.
PAL/NTSC VIDEO OUTPUTS
Connect the visualiser to your computer with the supplied USB cable.
The S-Video and composite video outputs are set to PAL (NTSC) during
The visualiser software is available on the supplied CD-ROM.
manufacturing.
CONTROLLING THE VISUALISER FROM A COMPUTER
INSTALLING VISUALISER SOFTWARE
You can control the visualiser from a computer connected with a RS232
This function is to snap and display images with the USB interface, which
connector.
includes displaying static and dynamic pictures, snapping dynamic images and
A. Connect the computer and the visualiser with the computer
playing back the dynamic images with the Windows Media Player or its own
player. RS-232 cable (9-pin to 9-pin).
A. Insert the CD-ROM that comes with your visualiser into the CD-ROM
B. Select [Start] -> [Program] -> [VideoCap] -> "VideoCapx.xx"
drive. If Auto run is enabled on your system, then the Software Setup
(x.xx is software's version) to open the software.
window will be displayed automatically as below.
C. Click "Control Panel" under "Capture".
D. Select the COM port COM1 or COM2 and you can control the
visualiser by clicking the buttons on the menu.
Toolbar
Control : Control the visualiser by a computer through RS232 cable.
Capture one frame :
to the desired path.
Full Screen :
click to exit.
Start Capture :
Stop Capture :
VIDEO DISPLAY AND CAPTURE
If it does not start automatically, after inserting the CD-ROM, Click [Start]
You can capture and control images on the visualiser from
-> [My Computer], and double click
different among different computer systems), then the above screen will appear
immediately.
Capture the current preview image and save it
Full screen display the preview content, left double
Start to video capture
Stop video capture
(the CD-ROM drive letter might be