Genee World Genee Vision 8100 User Manual page 17

IMAGE REVERSION
When you open the capture program, but can not capture the image, please
Press the "Mir" button once to V-reverse the image and the vertically mirrored
set the signal input source: click "Option"
image will be displayed. Press the "Mir" button again to exit. (On the remote
INPUT as S-Video IN.
control, please press the "MIRROR" button)
IMAGE SPLIT
Place your material on the working surface.
Press "SPLIT", the image will be split into two images. One is the current live
Select the enlargement required with the " T" and " W " keys.
image the other is a frozen snapshot of the last image, Press the "SPLIT"
Adjust the focus with the "Near" and "Far"
button again to exit.
Note: This function is not available on S-Video and Video output.
DYNAMIC/STATIC MODE SWITCH
To display dynamic images, Press the "D./S." button to switch to
the Dynamic mode, the image will be clear and has no choppy strobe effect.
To display still images, press the "D. / S." button switch to the Static mode.
Note: This function is not available on S-Video and Video output.
+
"Video Crossbar", and then set
keys or "AUTO" key.