Uconnect™ Voice Command - RAM 3500 User Manual

• Any voice commanded system should be used only in safe driving
conditions following local laws and phone use. All attention should be
kept on the roadway ahead. Failure to do so may result in a collision
causing you and others to be severely injured or killed.
• In an emergency, to use Uconnect™ Phone, your mobile phone must be:
• turned on,
• paired to Uconnect™ Phone,
• and have network coverage.
Uconnect™ VOICE COMMAND
• The Uconnect™ Voice Command system allows you to control your AM, FM
radio, satellite radio, disc player, Uconnect™ Phone, a memo recorder, and
supported portable media devices. The Voice Command system also provides
limited capability to select and play music by artist, song, album, music,
genre, or playlist from your compatible iPod
available for Media Center 430/430N when connected to the USB port in the
center console).
• When you press the Voice Command button
faceplate or steering wheel, you will hear a beep. The beep is your signal to
give a command. If you do not say a command within a few seconds, the
system will present you with a list of options. If you ever wish to interrupt the
system while it lists options, press the Voice Command button
for the BEEP, and say your command.
Voice Command for Text Messaging (Media Center 430/430N/230/130 only)
• If equipped with Uconnect™ Voice Command, your Media Center 430N radio
can play incoming SMS messages through the vehicle sound system.
• It also allows you to respond by selecting from various pre-defined phrases.
• Not all phones are compatible with this feature. Refer to the phone
compatibility list at dodge.com/uconnect. Connected mobile phones must be
bluetooth-compatible, and paired with your radio.
• For vehicles equipped with Video Entertainment System (VES)™, refer to the
Uconnect™ Voice Command section of the Uconnect™ User's Manual on the
DVD for further details.
• For vehicles not equipped with VES™, refer to your vehicle Owner's Manual on
the DVD for Uconnect™ Voice Command information.
Changing The Volume
• Start a dialogue by pressing the Voice Command button
command (for example, "tutorial").
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a
comfortable level while the Voice Command system is speaking. The volume
setting for Voice Command is different than the audio system.
WARNING!
® device (this capability is
ELECTRONICS
located on the radio
, listen
, then say a
39