Sony BDV-E6100 Operating Instructions Manual page 58

i!i lii iii llllllllllllllllllllllll iliI llllll!i
Radio stations cannot b e tunedin.
---* Check that tile antenna (aerial) is
connected securely. Adjust the antenna
(aerial).
The signal strength of the stations is
too weak (when tuning in with
automatic tuning). Use manual tuning.
Thediscdoesnotplay.
The region code on the BD/DVD does
not match the system.
Moisture has condensed inside the unit
and may cause damage to the lenses.
Remove the disc and leave the unit
turned on for about half an hour.
The system cannot play a recorded disc
that is not correctly finalized
(page 60).
Filenamesarenotdisplayed
correctly.
The system can only display [SO
8859-1 compliant character formats.
Other character formats may be
displayed differently.
Depending on the writing software
used, the input characters may be
displayed differently.
A discdoesnotstartplaying fromthe
beginning.
Resume play has been selected. Press
OPTIONS and select [Play from
beginning], then press @.
Playback does notstartfromthe
resume point whereyoulaststopped
playing.
The resume point may be cleared from
memory depending on the disc when
• you open the disc tray.
• you disconnect the USB device.
• you play other content.
• you turn off the unit.
The language f or thesoundtrack/
subtitle or angles cannot b echanged.
---* Try using the BD's or DVD's menu.
Multi-lingual tracks/subtitles or multi-
angles are not recorded on the BD or
DVD being played.
Bonus contents o r otherdatathatare
contained in a BD-ROIVI cannot b e
played.
Try the following:
@ Remove the disc.
@ Turn the system off.
@ Remove and reconnect the USB
device (page 28).
@ Turn the system on.
(_) Insert the BD-ROM with
BONUSVIEW/BD-LIVE.
The USB deviceisnotrecognized.
Try the following:
@ Turn the system off.
@ Remove and reconnect the USB
device.
@ Turn the system on.
Make sure that the USB device is
securely connected to the _) (USB)
port.
Check if the USB device or a cable is
damaged.
Check if the USB device is on.
58 us