Sony BDV-E6100 Operating Instructions Manual page 56

[Anewsoftware version isavailable.
Pleasego to the "Setup" section of
the menu andselect "Network
Update" to performthe update.]
appearson the TV screen.
--+ See [Network Update] (page 46) to
update the system to a latest software
version.
"PRTECT","PUSH"and "POWER"
appearalternately inthefrontpanel
display.
--+ Press I/(_) to turn off the system, and
check the following items after
"STBY" disappears.
• Are you using only the supplied
speakers'?
• Is anything blocking the ventilation
holes of the system?
• After checking the above items and
fixing any problems, turn on the
system. If the cause of the problem
cannot be found even after checking
all the above items, consult your
nearest Sony dealer.
"LOCKED" a ppears in thefrontpanel
display.
---+ Set the child lock function to off
(page 42).
"D. LOCK"appears in thefrontpanel
display.
---+ Contact your nearest Sony dealer or
local authorized Sony service facility.
"Exxxx"(x is a number)appears in
thefrontpaneldisplay.
--+ Contact your nearest Sony dealer or
local authorized Sony service facility
and give the error code.
appears without a nymessages o n
theentireTVscreen.
---+ Contact your nearest Sony dealer or
local authorized Sony service facility.
Thereisno picture or the picture is
not outputcorrectly.
---+ Check the output rnethod on your
system (page 19).
---+ Hold down I1_ and VOL - on the unit
for more than 5 seconds to reset the
video output resolution to the lowest
resolution.
---+ For BD-ROMs, check the [BD-ROM
24p Output] settings in [Screen
Settings] (page 47).
Thereisno picturewhen youmakean
HDMIcableconnection.
---+ The unit is connected to an input
device that is not HDCP (High-
bandwidth Digital Content Protection)
compliant ("HDM[" in the front panel
does not light up) (page 19).
Thedarkareaof thepicture istoo
dark/the brightareaistoobrightor
unnatural.
---+ Set [Picture Quality Mode] to
[Standard] (default) (page 36).
Picturenoiseappears.
--+ Clean the disc.
---+ If the picture output from your system
goes through your equipment to get to
your TV, the copy-protection signal
applied to some BD/DVD programs
could affect picture quality. If you still
experience problems even when you
connect your unit directly to your TV,
try connecting your unit to the other
input jacks.
56 Us