Sony BDV-E6100 Operating Instructions Manual page 57

Animageisnotdisplayed onthe
entireTVscreen.
Check the setting of [TV Type] ill
[Screen Settings] (page 46).
The aspect ratio on the disc is fixed.
Colorirregularity occurs ontheTV
screen.
[f the speakers are used with a CRT-
based TV or projector, install the
speakers at least 0.3 meters (1 foot)
from the TV set.
[f the color irregularity persists, turn
off the TV set once, then turn it on after
15 to 30 minutes.
Make sure that no magnetic object
(magnetic latch on a TV stand, health
care device, toy, etc.) is placed near the
speakers.
Thereisno sound.
The speaker coMs are not connected
securely.
Check the speaker settings (page 40).
Thereis nosound from theTVvia the
HDMI(OUT) jackwhenusing the
AudioReturn Channel f unction.
Set [Control for HDMI] in [HDM[
Settings] of [System Settings] to [On]
(page 50). Also, set [Audio Return
Channel] in [HDM[ Settings] of
[System Settings] to [Auto] (page 50).
Make sure that your TV is compatible
with the Audio Return Channel
function.
Make sure that an HDM[ cable is
connected to a jack on your TV that is
compatible with the Audio Return
Channel function.
Thesystem doesnotoutputsound of
TVprograms c orrectly when
connected t o a set-top box.
Set [Audio Return Channel] in [HDM[
Settings] of [System Settings] to [Off]
(page 50).
Check the connections (page 20).
Severehumor noise is heard.
Move your audio equipment away
from the TV.
Clean the disc.
Thesound loses stereoeffect when
youplay a CD.
Select stereo sound by pressing
AUDIO (page 37).
Thesound outputsfrom thecenter
speaker o nly.
Depending on the disc, the sound may
output from the center speaker only.
Nosound or only a verylow-level
sound is heardfrom thesurround
speakers.
---* Check the speaker connections and
settings (pages 18, 40).
Check the sound mode setting
(page 24).
Depending on the source, the effect of
the surround speakers may be less
noticeable.
A 2-channel source is being played.
Distortion occursinthesound of a
connected e quipment.
---* Reduce the input level for the
connected equipment by setting
[Attenuate - AUDIO] (page 48).
A sudden loudmusic is heard.
The build-in sound demonstration is
activated. Press VOL - to reduce the
volume or press • to stop the
demonstration.
o.
-1
b"
3
o
-1
57 us