PSC DUET Programming Kit page 93

RS-232: CTS Scan Control — Enable
When this option is enabled, the
Clear To Send (CTS) line must be
active for the scanner to read and
transmit data. While the CTS line
is inactive, the scanner will remain
in a host disabled state. Following
a successful transmission, the CTS
signal must transition to inactive
and then to active to enable
scanning for the next bar code.
Scan the bar code below to enable
CTS scan control.
6 4 0 0 5 2 7 0 0 0 0 2 8
89
R44-1740