PSC DUET Programming Kit page 92

RS-232: CTS Flow Control — Enable
When Clear To Send (CTS) flow
control is enabled, the CTS signal
controls the transmission of data
to the host.
NOTE
If this feature is enabled, Xon/Off (soft-
ware flow control) should be disabled
(scan the bar code: Xon/Xoff—Disable ).
The result of enabling both flow controls
is unpredictable.
Scan the bar code below to enable
CTS flow control.
6 4 0 0 5 2 7 0 0 0 0 1 1
88
Duet™ and VS800™ Scanner Programming Kit