Specific Safety Rules - Chicago Electric 96435 Set Up And Operating Instructions Manual

5. Service
a. Have your power tool serviced by a qualified repair technician using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
1. Maintain labels and nameplates on the tool. These carry important safety
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
2. Avoid unintentional starting. Prepare to begin work before turning on the tool.
3. When using a handheld power tool, maintain a firm grip on the tool with both
hands to resist starting torque.
4. Do not lay the tool down until it has come to a complete stop. Moving parts can
grab the surface and pull the tool out of your control.
5. Do not leave the tool unattended when it is plugged into an electrical outlet. Turn
off the tool, and unplug it from its electrical outlet before leaving.
6. Use clamps (not included) or other practical ways to secure and support the
workpiece to a stable platform. Holding the work by hand or against your body is
unstable and may lead to loss of control, and personal injury.
7. This product is not a toy. Keep it out of reach of children.
. People with pacemakers should consult their physician(s) before use.
Electromagnetic fields in close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Do not use with power switch locked on.
• Properly maintain and inspect to avoid electrical shock.
• Any power cord must be properly grounded. ground Fault Circuit Interrupter
(gFCI) should also be implemented – it prevents sustained electrical shock.
9. Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities, contains chemicals known [to the State of California] to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and cement or other masonry products
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
SKU 96435 For technical questions, please call 1-800-444-3353.

SpECIFIC SAFETY RuLES

Page 5