Fujitsu Sun Oracle SPARC Enterprise M3000 Overview Manual page 31

LEDs on the Operator Panel
TABLE 1-6
Icon Name
POWER LED
XSCF
STANDBY
XSCF
LED
CHECK LED
The operator panel displays the states of the server using combinations of three
LEDs in addition to the states listed in
usually displayed in the course of operation from power-on to power-off of the
server.
State Display by Combination of LEDs on the Operator Panel
TABLE 1-7
Name
*
POWER XSCF STANDBY
XSCF
Off Off
Off Off
Off Blinking
Off Blinking
Color Description
Green Indicates the server power status.
• On: The power to the server (a domain) is on.
• Off: The power to the server is off.
• Blinking: The server is powered off.
Green Indicates the XSCF unit status.
• On: XSCF unit is functioning normally.
• Off: Input power source is off or is just after turned on, and
XSCF unit is stopped.
• Blinking: System initialization is in progress after power
was turned on.
Amber Indicates that the server has detected an error. This is
sometimes called a locator.
• On: An error that hinders startup was detected.
• Off: Normal, or power is not being supplied.
• Blinking: Indicates that the unit is a maintenance target.
CHECK
Off
On
Off
On
.
TABLE 1-6 TABLE 1-7
Description
Power is not being supplied.
Power has been turned on.
The XSCF unit is being initialized.
An error occurred in the XSCF unit.
Chapter 1 System Overview
lists the states that are
1-21