Introduction And Machine Specifications - American Sanders 8 Operator's Manual

Introduction and Machine Specifications

Operating Controls
Sanding Pressure
Adjustment
Tool Storage Tray
PART NUMBER
Abrasive Size
Contact Wheel Speed (rpm)*
Abrasive Speed (sfm)* (m/min)*
Dust Fan Speed (rpm)*
Dust Fan Flow (cfm)*
Motor
Leveling Control
Operating Control
Motor Starter/Protector
Sanding Pressure Adjustment
Wheels (Truck Assembly)
Wheel (Rear)
Drive
Dimensions
Weight
* revolutions per min.
**Steel (Standard) Urethane or canvas (optional)
CAUTION: Your equipment may be inappropriate on some installations. Some softer woods used
in flooring cannot support the pressure created by hard wheels.
A felt or rubber wheel should be used when these woods are encountered.
See parts list for optional wheels.
Always consult with the flooring manufacturer on the proper installation, preparation,
and finishing of their product. Determine suitability of your equipment in preparing
the product.
Clarke ® American Sanders American 8 Floor Sander Operator's Manual
Motor Starter / Protector
07032C
8 x 26½" paperback
2400/2800
4398/5131 sfm
6000
210 cfm
60 Hz 230V 4hp (3 kW)
Steel **
Steel
40½ x 15 x 36
216 lbs.
*surface feet per min.
***Urethane (Standard) Steel or Canvas (optional)
07105A 07048C
50 Hz 240V 3hp (2.2 kW)
Externally Adjustable
Adjustable Lever
Magnetic Circuit Breaker
Infinitely Adjustable
Urethane***
Canvas
V-Belt
3
/
4
*meters per min * cubic feet per min.
Leveling Controls
07106A
20.3 x 67.3 cm
2000/2333
1117/1303 m/min.
5000
83 liters/second
Steel** Urethane***
Steel Canvas
103 cm x 38 cm x 93 cm
98kg
Page 5