Heat & Glo SL-550BE Owner's Manual page 65

B. Vent Components Diagrams (continued)
8-1/8 in.
(206 mm)
15 in.
(381 mm)
Figure 16.6 DVP vent components
8-1/8 in.
(206 mm)
15 in.
(381 mm)
Figure 16.7 SL Series Vent Components
13 in.
Effective Length
(330 mm)
5-3/4 to 8-3/8 in.
146 to 213 mm
DVP-HRC-SS
DVP-HRC-ZC-SS
HORIZONTAL TERMINATION CAP
WARNING
Fire Risk.
• When using SL-HRC-SS and SL-HRC-ZC-SS
termination caps on top vented fi replaces, a one
foot minimum vertical vent section is required
before installing fi rst elbow.
• When using DVP-TB1 termination cap on top
vented fi replaces, a three foot minimum vertical
vent section is required before installing fi rst elbow.
13 in.
Effective Length
(330 mm)
5-3/4 to 8-3/8 in.
146 to 213 mm
SL-HRC-SS
SL-HRC-ZC-SS
HORIZONTAL TERMINATION CAP
DVP-TB1
SL-2DVP
SL-90D
ASSEMBLY
DVP-TB1
HORIZONTAL TERMINATION CAP
Heat & Glo • SL-550BE, SL-550BE-IPI • 2114-900 Rev. H • 2/08
5-1/2 in. 8-3/8 in.
140 mm 213 mm
3°
87°
10-1/2 in.
267 mm
10-7/8 in.
276 mm
5-1/2 in. 8-3/8 in.
140 mm 213 mm
3°
87°
10-1/2 in.
267 mm
10-7/8 in.
276 mm
DVP-TB1
65