•
A call can only be forwarded to one target telephone. For example, extension A's call is
forwarded to extension B. Extension B's call is forwarded to extension C. A call to extension
A is forwarded to extension B, but the call would not be forwarded directly to extension C
from A.
one step
B
one step
•
The extension which is set as the destination can call the original extension.
•
While setting, you can temporarily cancel this feature by pressing the FWD / DND button.
Pressing the FWD / DND button alternates between setting or cancelling the mode.
•
You can set the "Do Not Disturb (DND)" and "Call Forwarding (FWD)" features at the same
time. However, only one feature will work at a time. Pressing the FWD / DND button while
on-hook changes the feature as follows:
DND
•
The FWD / DND button light shows the current status as follows:
4.1 Customising Your Phone (Station Programming)
•
4.1.2 Customising the Buttons
Create or re-arrange an FWD / DND button.
4.3 Customising Your System (User Programming)
•
4.3.5 Flexible CO Button Assignment (005)
Operation
A
C
FWD
OFF
Off : Both features are not set.
Red on : DND mode
Red flash : FWD mode
This setting can be changed
by System Programming.
2.5 Before Leaving Your Desk
89