Caller Id Name Set (007) - Panasonic KX-TD500 User Manual

4.3.7 Caller ID Name Set (007)

With the Caller ID Service, the calling party is displayed either by its ID Code or by its name. If the
name display is required, use this programme to give a name to a Caller ID Code stored in
programme "4.3.6 Caller ID Dial Set (006)."
Default: All locations: Not Stored.
0 0 7
Dial 007.
• Up to 1000 Caller ID Names per tenant, 2000 per system, can be assigned.
Each name corresponds to a Caller ID Code programmed by "4.3.6 Caller ID Dial Set
(006)."
• A Caller ID Name cannot be assigned if the corresponding Caller ID Dial is not assigned.
• For entering characters, please refer to "Character Entry" in "4.3 Customising Your
System (User Programming)."
Customising Your Phone & System
location no.
NEXT
Press NEXT. Enter location
number (000-999).
4.3 Customising Your System (User Programming)
Caller ID name
STORE
Enter Caller ID name Press STORE.
(max. 16 characters).
To continue
NEXT PREV
OR
Press NEXT. Press PREV.
SELECT
Press SELECT.
To end
END
Press END.
241