Connecting to the Internet via Ethernet
Please go to Interface Setup - Internet. In Trasfer Modes menu please select Ethernet.
Please mind the following settings:
Encapsulation. Select the connection type your ISP requires.
Note: for instructions on configuring PPTP and L2TP connection please refer to the next
chapter.
Username and password. If your ISP provided you with the login and password to connect the
Internet please enter them here. This information can be noted in the agreement with the ISP or
in its support.
IP commom options. Make sure the Default Route - Yes.
NAT. Select "Enable".
IGMP Proxy. Select "Enable".
Click SAVE.
(please see the image at the next page)
35