Cisco Catalyst 3750 Hardware Installation Manual page 132

Connecting to DC Power
Insert the exposed wire of one of the four DC-input power source wires into the terminal block plug, as
Step 5
shown in
extend from the terminal block.
An exposed wire lead from a DC-input power source can conduct harmful levels of electricity. Be sure
Warning
that no exposed portion of the DC-input power source wire extends from the terminal block plug.
Statement 122
Figure C-7
Catalyst 3750 Switch Hardware Installation Guide
C-6
Figure C-7. Make sure that you cannot see any wire lead. Only wire with insulation should
Inserting Wires in the Terminal Block Plug
Appendix C
Return
Feed A
Negative
Return
Feed B
Negative
Connecting to DC Power
OL-6336-05