B&C Technologies SI Series Installation And Operation Manual page 28

Never touch internal or external steam pipes, connections, or components. These
surfaces can be extremely hot and will cause severe burns. The steam must be
turned off and the pipe, connections, and components allowed to cool before the
pipe can be touched.
Table 5.7: Steam Service Consumption Data
MODEL
STEAM INLET and CONSUMPTION:
Steam inlet size
Required steam to heat bath 10F (6C)LOW
Required steam to heat bath 10F (6C)HIGH
Average Steam consumption per cycle
MODEL
STEAM INLET and CONSUMPTION:
Steam inlet size
Required steam to heat bath 10F (6C)LOW
Required steam to heat bath 10F (6C)HIGH
Average Steam consumption per cycle
MODEL
STEAM INLET and CONSUMPTION:
Steam inlet size
Required steam to heat bath 10F (6C)LOW
Required steam to heat bath 10F (6C)HIGH
Average Steam consumption per cycle
MODEL
STEAM INLET and CONSUMPTION:
Steam inlet size
Required steam to heat bath 10F (6C)LOW
Required steam to heat bath 10F (6C)HIGH
Average Steam consumption per cycle
Units
DN in
kg lbs 3.15
kg lbs 4.77
kg lbs
Units
DN in
kg lbs
kg lbs
kg lbs
Units
DN in
kg lbs
kg lbs
kg lbs
Units
DN in
kg lbs 5.25
kg lbs 7.95
kg lbs
24
SI-110
20 3/4
7
10.5
72 158
SI-135
20 3/4
3.8 8.4
5.8 12.76
88 194
SI-200
25 1
5 11
7.7 16.9
117 194
SI-275
25 1
11.5
17.5
120 260