Table of Contents
Advertisement
To Verify Installation
Windows 2000/XP/2003 Server
1. Go to Start > Settings > Control Panel.
2. Double click System.
3. Click the Hardware tab and choose Device Manager.
4. If the card does not appear with a red x or yellow exclamation point (!) next to it,
Windows has not detected a problem with the installation and the card should
function normally.
Windows 98SE/ME
1. Go to Start > Settings > Control Panel.
2. Double click System.
3. Click the Hardware tab.
4. If the card does not appear with a red x or yellow exclamation point (!) next to it,
Windows has not detected a problem with the installation and the card should
function normally.
Configuring Other Operating Systems
For information on how to configure the card for use with other operating systems,
consult the documentation for that OS in the corresponding folder on the Installation CD.
Understanding the LED Status Indicators
The CB1000BT uses two indicators to show network status.
F - When flashing, indicates network activity
L - When solid, indicates a link with the network
Specifications
Form Factor / Interface
Data Transfer Rates
Supported Cabling
OS Support
Chipset
Certifications
Instruction Manual
CardBus, Type II (32-bit)
1000, 100, 10 Mbits/sec. via auto-negotiation
(Full and half duplex modes supported)
Existing network hardware may limit connection speed
10-BaseT: Category 3/4/5/5E/6
100-BaseT: Category 5/5E/6
1000-BaseT: Category 5E/6, Category 6 recommended
(The card supports auto-cabling detection and correction between
crossover and straight-through connections)
Windows: 98SE, NT 4, ME, 2000, XP, 2003 Server
DOS
Linux
RTL8169SBL
FCC Class B, CE
3
Advertisement
Table of Contents
