Connecting To A Vcr Or Other Similar Device - Philips DVDR5520H User Manual

Step 2: Optional Connections
Connecting to a VCR or
other similar device
This connection enables you to record
from video tape to hard disk and allows
the VCR to be used for playback on the
TV if the recorder is turned off.
Note:
Your new recorder can replace the VCR
for all your recording needs. Just unplug
all the connections to your VCR.
A
Connect the antenna cables. See
'Connecting the antenna cables' in Step 1:
Basic Connections chapter for more
information.
B
Connect a RF antenna cable (supplied)
from the TO TV ANTENNA INPUT
antenna input socket on your TV (usually
labelled as ANT, ANTENNA IN, RF IN).
22
Downloaded From Disc-Player.com Philips Manuals
DIGITAL
ANTENNA INPUT
ANTENNA INTERCONNECT CABLE
DIGITAL ANTENNA
(OPTIONAL, REFER TO MANUAL) LOOP THROUGH
TO TV EXT 1 TO VCR/SAT EXT 2
G-LINK
TO TV ANTENNA ANALOG
INPUT ANTENNA INPUT
B
socket on the recorder to the
(continued)
VCR (example only)
VHF/UHF
RF IN
SCART IN
SCART OUT
VHF/UHF
RF OUT
D
HDMI
OUT
CVBS-OUT
Y P
B
L
P
R
R
COAXIAL
AUDIO COAXIAL COMPONENT
S-VIDEO DIGITAL
OUT DIGITAL OUT VIDEO OUT
OUT IN
TV
C
C
Connect a scart cable (supplied) from the
EXT1-TO TV socket on the recorder
to the corresponding SCART socket on
the TV.
D
Connect another scart cable (not
supplied) from the EXT2-TO VCR/
SAT socket on the recorder to the Scart
socket (usually labelled as TV OUT or
TO TV) on the VCR.
Helpful Hints:
– Most commercial video cassettes and
DVDs are copy-protected and therefore
cannot be recorded.
– Connect the recorder directly to the TV. If
there is a VCR or an additional device in
between, the picture quality may be poor.
MAINS