Connecting To A Vcr Or Other Similar Device - Philips DVDR3355/02B User Manual

Optional Connections
A
Antenna/cable
TV signals
B
C
Connecting to a VCR or
other similar device
This connection enables you to record
from video tape to a DVD+R/+RW and
allows the VCR to be used for playback if
the DVD recorder is turned off.
Connect the Antenna/Cable TV signal to
A
the antenna input (RF IN) socket on the
VCR.
Use the supplied RF coaxial cable to
B
connect the antenna output (RF OUT)
socket on the VCR to the ANTENNA
socket on the DVD recorder.
Use another RF coaxial cable to connect
C
the TV socket on the DVD recorder
to the antenna input socket on the TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
1_dvdr3355_eu_eng_15891.indd 16
(continued)
VHF/UHF
RF IN
TV OUT
VIDEO
OUT
AUDIO
L
VHF/UHF AUDIO
R
RF OUT
E
TV
S-V ID E O IN
AU D IO O U T
V ID E O IN
TV IN
VIDEO
IN
AUDIO
L
AUDIO
R
D
Use the scart cable to connect EXT1
D
TO TV-I/O socket on the DVD
recorder to the corresponding SCART
input socket on the TV.
Use another scart cable to connect the
E
EXT2 AUX-I/O socket on the DVD
recorder to the Scart output socket (or
labelled as TV OUT or TO TV) on the
VCR.
Helpful Hints:
– Most commercial video cassettes and
DVDs are copy-protected and therefore
cannot be recorded.
– Connect the DVD recorder directly to the
TV. If there is a VCR or an additional device
in between, the picture quality may be poor
because of the copy protection system built
into the DVD recorder.
Back of aVCR
(Example only)
2005-04-27 2:35:48 PM