Transmission Chain Tensioning And Lubrication - RIEJU tango 50 Owner's Manual

TRANSMISSION CHAIN TENSIONING AND LUBRICATION

Chain control and setting should be done only on the rear tyre axel, always concentrating on the chain's
maximum point of tension.
To control free-play, spin the back wheel several times and check the tension in various areas to find the
tensest point.
The motorbike should be placed vertically with its wheels on the ground and the chain setting should be
20 to 35 mm.
To regulate the chain, loosen the rear wheel axel, screwing or unscrewing the screws and nuts next to the
axel, making sure that the distance is always the same on both sides.
20 a 35 mm.
23