Legacy Devices - Intel i915PL User Manual

BIOS

Legacy Devices

Scroll to Legacy Devices and press <Enter>. The following screen appears:
Onboard FDC Controller
Select "Enabled" if you wish to use onboard floppy disk controller (FDC). If you install
an external FDC or the system has no floppy drive, select "Disabled "in this field.
Options: Enabled, Disabled.
Onboard Serial Port 1
Select an address and corresponding interrupt for the first serial port.
Options: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
Onboard IrDA Port
Select an address and corresponding interrupt for the IrDA port.
Options: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
Onboard Parallel Port
This field allows the user to configure the LPT port.
Options: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
This field allows the user to select the parallel port mode.
Options: SPP, EPP, ECP, ECP+EPP.
EPP Mode Select
This field allows the user to select the EPP mode for parallel port mode.
Options: EPP1.9, EPP1.7.
ECP Mode USE DMA
This field allows the user to select DMA1 or DMA3 for the ECP mode.
Options: 1, 3.
Page 4-11