Table of Contents
Advertisement
BIOS
Chipest IDE Devices
Scroll to Chipest IDE Devices and press <Enter>. The following screen appears:
Delay For HDD (Secs)
This item allows you to set longer time stand by before system Scan HDD at post
screen. Some HDD may need a longer stand by time before it can be detected.
Options: 0 ~ 15.
IDE HDD Block Mode
IDE Block Mode allows the controller to access blocks of sectors rather than a
single sector at a time. The default is Enabled.
Options: Enabled, Disabled.
IDE DMA transfer access
Automatic data transfer between system memory and IDE device with minimum CPU
intervention. This improves data throughput and frees CPU to perform other tasks.
Options: Enabled, Disabled.
Chipest Primary (Secondary) PCI IDE
The mainboard supports two channel of ordinary IDE interface. Select "Enabled"
to activate each channel separately.
If you do not use the onboard IDE connector, set the Onboard Primary
(Secondary) PCI IDE to "Disabled".
Page 4-8
Advertisement
Table of Contents
