2. Mounting Instructions
Follow the steps below to mount the thermostat:
1. Open de thermostat:
2. Connect the thermostat according to the below diagram.
N
C T
Floor sensor
- 8 -
2. Mounting Instructions
The screen of the heating cable must be connected to the
earth conductor of the power supply cable by using a separate
connector.
Note: Always install the floor sensor in a conduit in the floor.
3. Mount and reassemble the thermostat.
•
Fasten the thermostat to a socket or an exterior wall
box by driving the screws through the holes in each
side of the thermostat.
•
Install the frame and front cover in the reverse order of
disassembly.
4. Turn on the power supply
Max.
15A
- 9 -