1. Introduction 22°C 16,8 kOhm Switching differential ±0,2° C Veria Control B35/45 is a electronic thermostat provided with Temperature range: a 2-pole switch and a floor sensor to measure and control the - Veria Control B35 (0) 15-35° C desired floor temperature. The thermostat is intended for - Veria Control B45 (0) 5-45°...
Produced for: • The sensor is to be considered as live voltage. Have this in mind if the sensor must be extended. Veria ApS • Always connect the thermostat to continuous power Ulvehavevej 44 supply.
2. Mounting Instructions 2. Mounting Instructions 2. Mounting Instructions A floor sensor enables a more ac- curate temperature control and is Please follow the below guidelines when installng the ther- recommended in all floor heating mostat applications and mandatory un- der wooden floors to reduce the risk of over-heating the floor.
Page 5
2. Mounting Instructions 2. Mounting Instructions Follow the steps below to mount the thermostat: The screen of the heating cable must be connected to the earth conductor of the power supply cable by using a separate 1. Open de thermostat: connector.
3. Settings 3. Settings 3.1 Temperature settings • Without a floor sensor, the temperature control may be less accurate and you risk overheating the floor. How to change the minimum and maximum floor temperatures 1. Remove the adjustment button. 2. Move the pins to the desired positions. (1 en 2) 3.
4. Warranty 4. Warranty Warranty certificate Veria products are designed for many years of trouble-free ope- ration. Consequently, the Veria Quickmat and Veria Flexicable products are guaranteed for 12 years if installed properly in Name: accordance with the Installation Guide.