Advertisement
Table of content
1. Introduction
Veria Control B35/45 is a electronic thermostat provided with
a 2-pole switch and a floor sensor to measure and control the
desired floor temperature. The thermostat is intended for
flush-mounting.
Veria Control is equipped with a LED indicator showing
standby periods (green light) and heating periods (red light).
The maximum temperature setting of the Veria Control B35
Thermostat is 35°C, which makes it ideal for controlling
electrical heating mats beneath or on top of wood floors such
as parquet or laminates.
The Veria Control B45 Thermostat can be used for
temperatures up to 45°C, which makes it ideal for controlling
electrical heating mats on top of concrete or screed floors or
underneath a tile or decorative stone covering.
- 2 -
1.1 Technical Specifications
2
Operating voltage
3
Contact rating:
5
- resistive load
6
- inductive load
10
Sensor
10
Sensor values:
12
18°C
20°C
22°C
Switching differential
Temperature range:
- Veria Control B35
- Veria Control B45
Ambient temperature
range
Frost protection
(
)
Led Indicator:
- No light
- Red light
- Green light
- Green light flashing
Protection rating
Dimensions & weight
180-250 VAC, 50/60 Hz
250V ~ 15A/3450W
cos ϕ = 0,3 Max. 4A
NTC 15 kOhm at 25° C
19,7 kOhm
18,0 kOhm
16,8 kOhm
±0,2° C
(0) 15-35° C
(0) 5-45° C
-10º to +30° C
15º C (B35) / 5º C (B45)
Thermostat off.
Heating mat/cable is active
The desired set point tempe-
rature has been reached.
Floor sensor is faulty
IP 31
85mm x 85mm & 90 g
- 3 -
Advertisement
