Mounting Instructions - Veria Control B35 Installation Manual

2. Mounting Instructions

2. Mounting Instructions
Please follow the below guidelines when installng the ther-
mostat
Place the thermostat at a suit-
able height on the wall (typi-
cally 80-170cm)
In wet rooms, place the thermo-
stat according to local regula-
tion on IP classes.
Plaats de thermostaat niet aan
de binnenzijde van een buiten-
muur.
- 6 -
2. Mounting Instructions
A floor sensor enables a more ac-
curate temperature control and is
recommended in all floor heating
applications and mandatory un-
der wooden floors to reduce the
risk of over-heating the floor.
• Place the floor sensor in a
conduit in an appropriate
place where it is not ex-
posed to sunlight or draft
from door openings.
• Equally distant and >2cm
from two heating cables.
• The conduit should be
flush with the floor surf-
ace - countersink the con-
duit if necessary.
• Route the conduit to the
connection box.
• The bending radius of
the conduit must be min
50mm.
Avoid placing the thermostat in
direct sunlight
- 7 -