Invacare Kite Service Manual page 91

®
Invacare - Kite
·
Open the power supply chain of the lifter:
- Flip the cover (1) up.
- Pull the flap (2) out of the cover.
- Repeat this procedure link by link.
·
Remove both cable ties that secure the cable at the ends of the power supply chain.
·
Pull the cable out of the power supply chain.
·
Use the Phillips screwdriver to loosen the screws (1).
·
Remove the power supply chain (2).
·
Loosen the screws of the magnet with a Phillips screwdriver.
·
Remove the magnet.
·
Loosen the screws of the sensor with a Phillips screwdriver.
·
Remove the sensor.
SERVICE MANUAL
91