Invacare Kite Service Manual page 84

Hide thumbs Also See for Kite:

Table of Contents

SERVICE MANUAL

Repeat these work steps on the other side of the wheelchair.

Push the seat and the tube frame to one side on the front wheels. Make sure the tube frame

does not get scratched during this procedure.

Use a 10 mm Allen wrench to loosen the hexagon socket head screw (1).

Remove the hexagon socket head screw together with the Nord-Lock washer (6) and the

spacer ring (2).

Pull the double bearing (3) off of the bearing bolt.

Remove and inspect the floating bearings (4) & (5). Replace the bearings if they are damaged

or worn.

Replace the double bearing.

Assembling the double bearing of the Dual Swing Technology (D.S.T.)

Assemble the parts in reverse order.

Tighten the hexagon socket head screw (1) to a torque of 80 Nm.

Tighten the self-locking nuts of the bearing bolts (4) to a torque of 120 Nm.

Invacare

- Kite

Table of Contents