Invacare Kite Service Manual page 62

SERVICE MANUAL
·
Carefully remove the plastic cap (1) with the
large screwdriver.
·
Loosen the 19 mm nut (1) with the socket
spanner and remove it. Hold the wheel so
that it does not rotate when the nut is being
removed.
·
Pull the steering head shaft upwards out of
the steering head tube.
·
Take the washers out of the tube.
·
Take the ball bearing out of the tube.
·
The adjacent figure shows an overview of
the individual parts.
·
Plastic cap
·
Ball bearing
·
19 mm nut
·
Reassembly takes place in reverse order to
disassembly
·
Ensure that you insert the ball bearings
exactly as described below.
·
Also ensure that the washers are correctly
replaced.
62
®
Invacare - Kite